Table of Contents
Advertisement
2
Operation - System Telephones
Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
Barred range - If the telephone system's
barred range is programmed for your
telephone, you cannot dial the external
phone numbers that lie within the barred
range. You hear the error tone.
DTMF post-dialling - Is possible for all
existing external connections, even in an
inquiry, when brokering and during a three-
party conference. You can post-dial digits
and characters (
...
,
1
0
*
Preparing dialling - The receiver is on the
hook. Enter the phone number. The entered
phone number is displayed. Your system
telephone begins dialling automatically
when you pick up the receiver or when you
press the "loudspeaker" key.
Dialling with the receiver on the hook -
Press the "loudspeaker" key and dial the
phone number. Lift the receiver when the
other party answers.
2 - 20
Hand free - Instead of lifting the receiver,
you can also press the "loudspeaker" key in
all cases. You are then telephoning in the
hands free mode. Hands free mode is
turned off if you lift the receiver during the
call. You can conduct the call through the
receiver. To switch to the hands free mode,
press the "loudspeaker" key until you have
replaced the receiver. To end the call, press
the "loudspeaker" key.
and
)
#
Open listening - Via the built-in loud-
speaker other pe´rsons in the room may
listen to the call you are conductimg
through the receiver. to do this, press the
"loudspeaker" key.
Reserving an outside line - The system
telephone emits a short signal and Your line
appears in the display for 4 minutes if the
reserved outside line is free.
Advertisement
Table of Contents
