AGFEO basic-line plus AS 140 Operation And Program Manual page 138

2
Operation - System Telephones
Appointment call display off ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
The appointment call rings at the defined
time. Your display shows the "appointment
call" message. The clock symbol in the
display is off. The red LED flashes.
(
To turn off the display message and flashing
of the LED: press the "esc" key.
Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
You are only reminded of an appointment if
you have activated one. If you temporarily
do not wish to receive an appointment call,
for example, simply turn off the appoint-
ment.
You can only alternately turn a stored
appointment on or off with the "appoint-
ment" function key.
2 - 70
Appointment call
--
-- -- -- -- --
If you are currently conducting a telephone
conversation at the time of the appointment
call, you will not receive the appointment
call and the display message until you have
replaced the receiver.
The appointment call is only signalled on
your telephone, even if you have set
"diversion to".
13:15