Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
When forwarding an external call, you
must always seize the outside line by
entering " 0 ", even if automatic outside
line seizure is set on the telephone.
External forwarding is only possible if a dial-
up line (B-channel) is free.
You bear the cost of the externally for-
warded call.
A user on the internal S0 bus can only for-
ward an external call internally if the second
B channel of the internal S0 bus is free. Ex-
ternal/external forwarding is not possible.
Internal forwarding with announcement
If the internal user does not answer, you are
connected back to the external subscriber
after dialling r0 . If necessary, you can
Operation - analog / ISDN terminals
forward this external subscriber to another
internal user.
If the internal user is busy or has activated
the do not disturb feature on his telephone,
you are connected back to the external sub-
scriber after a short busy tone.
During the inquiry, the external subscriber
on hold hears a tune if you have internally
activated music on hold (MoH) or if music
on hold is fed in from an external source.
After internal forwarding without an-
nouncement, you receive a call back after
45 seconds if the internal user has not ac-
cepted the forwarded call within this time. If
you accept the call back, you are again con-
nected to the external subscriber. Ringing is
aborted after 60 seconds if you do not ac-
cept the call back.
1
1 - 7