AGFEO basic-line plus AS 140 Operation And Program Manual page 77

Setting outside line seizure ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
Depending of your area of use, you can
choose between two outside line seizure
settings (seizure of an outside line / B
channel) for your system telephone.
Automatic outside line seizure variant
(direct access)
You hear the external dial tone (continuous
tone) when you lift the receiver or when you
press the loudspeaker key.
You reach an external subscriber simply by
dialling the corresponding phone number.
The telephone system automatically seizes
an outside line (B channel).
To reach an internal user of your telephone
system, you must first press the internal key
and then post-dial the internal phone
number.
!2#
Enter "set to
The current setting is marked.
"
Enter a digit, e.g. "1"
1 = direct access (automatic outside line
seizur) on
0 = direct access (automatic outside line
seizure) off, "0" outside line seizure in
then on
! Conclude programming
Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
The outside line seizure variants can only be
set on the digital ISDN system telephones ST
25 of the AS 141 and AS 191 with the
Operation - System Telephones
"0" outside line seizure variant
("as-delivered" settings)
You hear the internal dial tone (three short
tones that are repeated constantly) when
you lift the receiver or press the loudspeaker
key.
You reach an external subscriber by dialling
a code "0" and the corresponding phone
number.
To reach an internal user of your telephone
system, you only need to dial the internal
phone number.
With this variant, the system telephones
behave like analog standard and ISDN
telephones.
#
" to set outside line seizure.
procedures of the analog and ISDN
terminals.
2
Direct access
on: 1 off:>0<
Direct access
on:>1< off: 0
2 - 9