AGFEO basic-line plus AS 140 Operation And Program Manual page 205

$
"enter": system restart (reset)
(All user data is loaded anew into the RAM
and programming is ended automatically)
or
&
"next": scroll further to the "clear memory"
menu
$
"enter": Initiate clearing of the memory (re-
setting the system to the "as-delivered"
state. A safety prompt follows.
$
"enter": confirm clearing of the memories if
you really wish to clear.
The memories are cleared (approximately 2
minutes). (All data is cleared and program-
ming is ended automatically.)
(
or "esc": return to the start of the program
"enter": return to the maintenance and test
program
!
"set": end programming
Resetting the telephone system (analog terminals / ISDN terminals) ¢¢¢¢¢¢¢
You must start programming mode by entering
h PS734
Lift handset Reset the telephone system
The reset is performed.
Deleting the memory (analog terminals / ISDN terminals) ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
You must start programming mode by entering
h PS709
Lift handset Delete memory (reset to the
as-delivered state)
The memory is deleted.
h ª
Q
S705
Q Pª
Acknowledge tone Replace the handset
h ª
Q
S705
Q Pª
Acknowledge tone Replace handset
3
Programming
-- 00:00
----------------
Clear memory
enter next esc
Confirm
enter esc
Clear memory
Please wait
-- 00:00
----------------
Maintenance/test
enter next esc
3 - 47