3
Programming
Entering external phone numbers* ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
!91
Note the display: If the setup code is re-
quested after pressing 9, you must enter the
code in 4 digits.
Display: No external phone number defined
Display: An external phone number is already
defined at position P00.
&
Select a free position (P00 to P15) with
"next".
$
Confirm position selection with "enter" and
to entry of connection type
$
Confirm with "enter" and select the
connection type with "next"
$
Confirm selected connection type with
"enter"
& $
With "next" and "enter" to entry of external
phone number
"
Entry of external phone number, max. 11
digits
- multiple subscriber number (MSN) or system
phone number without code, without direct
dialing.
- Enter system phone number plus extension
number (max. 3 digits) for connection type
PTP-DDI.
$
With "enter" to enter the name, max. 11
characters
Enter name for phone number (see "Entering
"
subscriber name"). If someone calls you
under the phone number, the name is
displayed on your system telephone instead
of the phone number.
Confirm with "enter"
$
"next": select next position or after "enter"
with "next": to enter connection type,
external phone number, call variants or
"set": exit programming.
3 - 14
S
* Use
-procedure on the ST 25 of AS 141, AS 191
P00 no entry
enter
next
esc
ext. 987654321
enter
next
esc
P01 no entry
enter
next
esc
Connection type
enter
next
P01 no entry
PTP
next
Connection type
enter
next
External number
enter
next
Enter number
_
Enter number
987654322_
Enter name
_
Enter name
AGFEO 1
P01 987654322
enter
next
esc