Table of Contents
Advertisement
2
Operation - System Telephones
Displaying a call list ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
-
The receiver is on the hook. On the display,
you see the "!" symbol indicating that a
message is available. The red LED also
flashes.
&&
There is at least one entry in the call list.
$
To see the first entry:
Press the "enter" key. On the display, you see
an external phone number and the date/time
of the last call
or
the entry in the phonebook (name) and the
date/time of the last call
or
a reminder to call an internal user and the
date/time of the last call.
Now, you have several possibilities
&
Scroll with the "next" key to see further
Scrolling:
entries. The LED flashes until you call or clear
the entry.
Lift the receiver. The displayed phone number
+
Dialling:
is dialled automatically.
If the other user answers, the entry is cleared
from the call list.
If the other user does not answer, the entry
remains.
Press the "clear" key. You clear the displayed
?
Clearing:
entry.
Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
By pressing "esc", you cancel the display of
the call list.
As the phone number is entered in the call
list with the prefix, it may happen that you
cannot dial the phone number directly out
of the call list if you only have the "local
2 - 32
--
-- -- -- -- --
List of calls
read
0521987654
from 9:55 20. 3.
ENGINEERING
from 9:55 20. 3.
Telephone 13
from 9:55 20. 3.
0301234567
from 9:12 20. 3
Calling
0301234567
--
-- -- -- -- --
network" privilege. In this case, the "local
range/privilege 3" should be enabled for
you and your own local area code should be
entered.
The call list is not stored in the event of a
power failure.
11!52
enter
11:52
Advertisement
Table of Contents
