AGFEO basic-line plus AS 140 Operation And Program Manual page 112

2
Operation - System Telephones
When you hear a telephone voice message ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
You hear the acknowledgement tone and
then a voice message.
If you wish to speak to the person
announcing the message:
= +
Press the "loudspeaker" key or lift the
or
receiver. Only you are then connected with
this person in an internal connection.
If you are the only voice message participant
and if you have activated automatic activa-
tion of your hands free microphone, you can
immediately talk with the person making the
voice message announcement in a hands free
connection.
= - Press the "loudspeaker" key or replace the
or
receiver. The call is ended.
Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
A voice message announcement to tel-
ephones is only possible to system tel-
ephones. At least one of the selected system
telephones must be free.
If an user has activated automatic activation
of the hands free microphone on his system
telephone (see "System telephone set-
tings"), when a single voice message
announcement is made he no longer needs
to pick up the receiver to speak to the
2 - 44
Voice message 13
for telephone 11
Telephone 13
--
-- -- -- -- --
person making the announcement. He is
automatically in hands free mode with that
person and two-way communication is
possible.
You can vary the voice message volume by
entering "set 25 1...7 set".
You can directly enter the participants of a
group voice message by means of the "set"
and "voice message" keys.
11:52