AGFEO basic-line plus AS 140 Operation And Program Manual page 73

Setting the display ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
!23
Enter "set 23" to modify the display contrast.
The current setting is marked
"
Enter the digit for the new setting, e.g. "2"
Meanings:
1 - more viewed from the front is good
7 - more viewed from above is good.
The contrast changes immediately.
! Conclude programming.
Hands free microphone automatically on ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
!24
Enter "set 24" to automatically activate the
hands free microphone.
The current setting is marked.
"
Press the digit 1 to activate automatic
activation of the hands free microphone
(deactivate by pressing the key "0").
!
Conclude programming.
Setting the open listening volume ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
!25
Enter "set 25" to set the open listening
volume. The current setting is marked.
"
Enter the digit for the new setting, e.g. "2"
Meaning: 1 - very low
!
Conclude programming.
Setting the headset volume (only on the digital system telephone ST 25) ¢¢
!26
Enter "set 26" to set the headset volume.
The current setting is marked.
"
Enter the digit for the new setting, e.g. "2"
Meaning: 1 - very low
!
Conclude programming.
7 - very high.
5 - very high.
Operation - System Telephones
Display contrast
1 2 3>4<5 6 7
Display contrast
1>2<3 4 5 6 7
auto. Microphone
on: 1 off:>0<
auto. Microphone
on:>1< off: 0
Open list.vol.
1 2 3 4>5<6 7
Open list.vol.
1>2<3 4 5 6 7
Headset volume
1 2 3 4>5<
Headset volume
1>2<3 4 5
2
2 - 5