1-4) Machine Operation; 1-5) Devices For Safety - SunStar SPS/E-BS1201H User Manual

1-4) Machine
Operation
Caution
1-5) Devices for
Safety
Caution
Bartack Series is made to sew patterns on fabrics and other similar material for
manufacturing. Follow the following indications when operating the machine.
ⓐ Read through this manual carefully and completely before operating the machine.
ⓑ Wear the proper clothes for work.
ⓒ Keep hands or other parts of the body away from the machine operation parts(needle,
shuttle, thread take-up lever, and pulley etc.) when the machine is being operated.
ⓓ Keep the covers and safety plates on the machine during operation.
ⓔ Be sure to connect the earthing conductor.
ⓕ Close down the electric motive power and check if the switch is turned "off"before
opening electric boxes such as the control box.
ⓖ Stop the machine before threading the needle or checking after work.
ⓗ Do not step on the pedal when turning the power on.
ⓘ Do not use several motor per a electric outlet.
ⓙ If possible, install the machine away from loud noise such as high frequency welding
machines
ⓚ Be careful when the upper feed plate comes down to press. Otherwise, the finger or hand
height be hurt at smacking.
1) Make sure that the cover is in place, while the machine is
operating. Otherwise, the belt might injure or cut a finger.
2) Make sure that the power is turned "OFF" before examining
Warning
or adjusting the machine.
ⓐ Safety label : It describes cautions during operating the sewing machine.
ⓑ Thread take-up cover : It prevents from any contact between body and take-up lever.
ⓒ Motor cover : It prevents from accidents during rotation of motor.
ⓓ Label for specification of power : It describes cautions for safety to protect against
electric shock. (Voltage and Hz)
ⓔ Finger guard : It prevent from contacts between a finger and needle.
ⓕ Safety plate : It protects eyes against needle breaks.
ⓑ
ⓐ
ⓕ
ⓔ
ⓓ
ⓒ
7