(3) Setting Pattern Data Call Function
You can inactivate calling unnecessary patterns. This prevents calling wrong patterns by mistake and helps you call the
necessary patterns.
Ex) Inactivating calling of patterns 1 and 2
A. Turn on the memory switch and press
"A-03" on the screen.
B. Press
READY
ⓐ part : pattern number
ⓑ part : 0 :calling impossible
ⓑ part :
1 :calling possible
C. Press
–/BACK
D. Press
SELECT
E. Press
–/BACK
F. Register the set-up using
(4) Setting the Counter Function
Ex) Changing production counter (addition mode) to lower thread counter (reduction mode)
A. Turn on the memory switch and press
"A-05" on the screen.
B. Press
READY
C. Press
+/FORWARD
ⓐ part : 0 : production counter
ⓐ part :
1 : lower thread counter
D. Register the set-up using
24
+/FORWARD
to display the present set-up value.
to change "1" in ⓑ to "0".
to change "1" in ⓐ to "2"
to change "1" in ⓑ to "0".
.
READY
+/FORWARD
to display the present set-up value.
to set "05-1".
.
READY
to display
to display
A - 0 3
0 1 - 1
ⓐ
ⓑ
0 1 - 0
0 2 - 1
0 2 - 0
A - 0 3
A - 0 5
ⓐ
0
1
A - 0 5