SunStar SPS/E-BS1201H User Manual page 14

D. Set Y Scale %
E. Adjustment of Presser Plate Height
a. Adjustment of ascending height
b. Adjustment of descending height
14
1) Press to display item "Y-Scale".
SELECT
2) Press ,
+/FORWARD
of 20%~200%.
1)
Communication ready
height of the presser foot when it is lifted.
2) Set the height within the scope of H 10 ~ H 17 by
pressing
+/FORWARD
3) Press the key to save the changed values and
READY
make the machine return to the ready mode.
1) Press the key to display the height
CF card download
of the presser foot when it descends.
2) Set the height within the scope of L 1 ~ L 17 by pressing
and
+/FORWARD –/BACK
3) Press the key to save the changed values and
READY
make the machine return to the ready mode.
to set within the range
–/BACK
Press the key to display the
and .
–/BACK
.