SunStar SPS/E-BS1201H User Manual page 33

(6) Testing Synchronizer
(7) Testing Pedal Input
1st Step
2nd Step
Aux1 switch
Aux2 switch
(8) Testing Auxiliary Output
Aux. output On/Off
End of test
1. Run the Machine TEST and then press
and
2. Press
3. Rotate the pulley manually. The screen will display the
rotation number and the No. lamp will display synchro
signal.
No. of circulation
◀ CAUTION ▶
No change in value after more than one rotation
means synchro-related errors including connector.
4. Press
1. Run the Machine TEST and then press
and
2. Press
3. Press pedal to 1st step and No. lamp will turn on. Press
to 2nd step and you will see X-scale lamp be lit.
Pressing Aux 1 switch will turn on Y-scale lamp and
Aux 2 switch on speed lamp.
4. Press
1. Run the Machine TEST and then press
and
2. Press
3. Press
(J11 on digital circuit board). Press
turn off all of them.
4. Press
to display "t-05" .
–/BACK
.
READY
to end the test.
SELECT
to display "t-06" .
–/BACK
.
READY
to end the test.
SELECT
to display "t-07" .
–/BACK
.
READY
to light on all of the 8 auxiliary output
READY
to end the test.
SELECT
+/FORWARD
+/FORWARD
+/FORWARD
again to
READY
33