SunStar SPS/E-BS1201H User Manual page 32

(3) Solenoid Test
Thread Trim Solenoid
Work Clamp Solenoid
Aux2 Solenoid
Aux3 Solenoid
(4) Testing Main Shaft Motor
Main Motor Run/Stop
Increase the speed
Decrease the speed
(5) Testing Encoder
32
1. Run the Machine TEST and then press
and
–/BACK
2. Press
3. Press the relevant key to run the solenoid and the
relevant lamp will turn on.
4. Press
※ Wiper solenoid is an optional function for pneumatic
specification (HA).
※ For 1254 (pattern taker), RESET button will serve as a
presser foot solenoid and the key will activates upper
feed plate in pneumatic type.
1. Run the Machine TEST and then press
and
–/BACK
2. Press
3. Press
main shaft motor will be displayed on the screen. Press
READY
Motor Speed
4. Adjust the speed using
keys.
5. Press
1. Run the Machine TEST and then press
and
–/BACK
2. Press
3. Rotate the pulley clockwise and the screen will display
encoder angle. No lamp will turn on.
Encoder Angle
◀ CAUTION ▶
No change in value means encoder-related errors
including connector.
4. Press
to display "t-02" .
.
READY
SELECT to end the test.
to display "t-03" .
READY .
READY and the motor will rotate. Speed of the
again to stop.
+/FORWARD
to end the test.
SELECT
to display "t-04" .
.
READY
to end the test.
SELECT
+/FORWARD
+/FORWARD
and
–/BACK
+/FORWARD