7-7) Pattern Download From Cf Card - SunStar SPS/E-BS1201H User Manual

7-7) Pattern download from CF card

■ How to download patterns
A. Turn on the power, while pressing
CF Card Download
B. Select the mode conversion key.
Mode
Key
P1 Check whether there is a CF card
Check the machine type
P2
P3 Check the directory where patterns are stored
P4 Check patterns in the chosen directory
P6 Execute downloading
C. Use "P1" to check whether CF is properly operating.
■ If there is no error, the screen displays "CF.OK" and then "Mode".
■ If there is an error, the screen displays "CF.Er". Check CF and
then press "P1" again to find out whether it is properly operating.
D. If CF is properly operating, press "P3" and examine the folder where
patterns are stored.
■ Press "P3" once, and the screen automatically displays the initial
position where the folder exists.
■ Press "P3" again, and the screen displays the next folder.
■ Choose the desired folder and press
location. Then the screen displays "Mode".
How to create a folder (directory) in the CF (CF reader is needed)
1) Create a folder named "Bbtk" for bartack-type machine in the CF card.
2) Create the pattern block folders (up to 96 folders can be created).
3) Create a folder name by entering Blk first, followed by a two-digit number, such as Blk00,
Caution
3)
4) If there are no patterns within a folder, "BL.Er" is displayed on the screen.
5) A CF reader shall be additionally purchased by a user.
42
Communication
at the same time. The screen displays "CF--".
Description
Blk01, Blk02, ... ... , Blk95.
If the naming rule is not followed, the folder name cannot be displayed on the screen.
and
Normal status
C F . O K
M C . b t
B L 0 5
0 5 . 1 0
d o U n
to store the folder
READY
C F - -
Screen display
Error status
C F . E r
M C . E r
B L . E r
0 5 . E r
-
C F . O K
M o d E
B L O 5