Service Procedures - Meiko FV 40.2 Operating Instructions Manual

Service plan for stationary rack machines

Service procedures

1. Pumps
Check pumps for watertightness, pump rotor noise, rotation
direction and function
Check pump suction
Check pump sieves correctly fitting and operating correctly
Check sliding ring washer/contra-rotation ring
2. Washing systems
Check water level in tank
Check that wash water pipe is watertight
Check washing system is complete and produces correct
spray pattern
Check wash arm hubs
3. Fresh water rinse
Check flow pressure/water pressure
Check rinsing system is complete and produces correct
spray pattern
Check that system is watertight
4. Housing and mounting parts
Check housing, tank, sheet metal cover, hood, doors and
covering of machine base for damage and correct operation
Check tank cover sieves
Check boiler, hoses, clamps, plastic parts and seals
Check operation of raising and lowering equipment
5. Fresh water installation
Check level regulation
Check valves, clean dirt trap
Check that all connections (incl. hand spray) are watertight
Check settings of built-in water softener (if fitted)
Check operation of complete or partial water softener (if
fitted)
Check water hardness
6. Waste water installation
Check if watertight
Check pressure hose position and operation of wash water
evacuation pump