Water Softener - Meiko FV 40.2 Operating Instructions Manual

SHORT OPERATING INSTRUCTIONS FV 40.2
Control panel
1. Preparing to wash and rinse
Ø Open the door.
Ø Insert wash water strainers.
Ø Close the door.
Ø Turn on the machine by pressing one of the pre-selector buttons.
Ø Check level and if necessary refill detergent and rinse aid
reservoirs.
Ø The machine is ready for operation when boiler and tank
temperature lights are on.
2. Washing and rinsing
Ø Place the material to be washed in the basket.
Ø Insert the basket in the machine and centre it correctly in the basket
carrier.
Ø Close the door.
Ø Pre-set program I, II or III.
Ø Press the program start button.
Ø The machine automatically washes, rinses and switches itself off when
the wash program is finished. Open the door after the lamp goes out
and remove the basket.
3. Shutting the machine down
Ø Press the "0" button (Off button). The machine is switched off when all
the lights are out.
Ø To empty the tank press the program start button.
Ø After the tank water has been pumped out, the interior is rinsed with
fresh hot water. The door must be kept closed. The waste water pump
disconnects itself automatically.
Ø Clean tank, strainers and wash arms.
4.

Water softener

Ø A red lamp indicates when the salt container needs refilling.
The salt container is situated in the tank of the machine. Use a funnel
for filling. The seal and thread must be cleaned before re-tightening.