Meiko FV 40.2 Operating Instructions Manual page 6

General safety information
Operating instructions
FV 40.2
Ø Therefore, set the local main switch to "OFF" or disconnect the local
main fuse.
The appliance can now be properly recycled (stainless steel, plastic
materials, etc. separately).
Basic information on the small machine
Each machine is manufactured according to state of the art technology.
Operation is safe.
Dangers could arise from this model if it is incorrectly operated by
unsuitable operating staff or if it is not used for the purpose intended.
Liability
We accept no responsibility for damage to the appliance and other
objects caused by operating faults or by failure to observe the operating
instructions. Any modifications to the appliance - especially internal
technical modifications - undertaken by unauthorised persons without
the written permission of the manufacturer will invalidate the warranty
and all product liability.
4.1 General description of the model
4.1.1 Type
Square basket appliance with stationary basket.
4.1.2 Wash principle
The appliance has one wash and one final rinse cycle.
The temperature regulator maintains the wash temperature. A
centrifugal pump moves the water from the wash tank into the wash
nozzles. The water jets hit the items to be washed from different
directions. This guarantees an even wash.
The washing cycle is followed by the fresh water final rinse. The items
are rinsed via a separate nozzle system with hot fresh water (dish
washers approx. 80 - 83° C, glass washers approx. 62 - 65° C). This
also heats the items for the subsequent drying process. At the same
time the final rinse water is used to regenerate the wash water, thus
reducing the level of contamination of the wash water.
4.1.3 Detergent dosing
Liquid alkaline detergent is automatically added by a built-in dosing unit.
The detergent is moved from the container into the wash tank by means
of a hose line. The exact dosing of the detergent is guaranteed by a
time switch.
- 6 -