Meiko FV 40.2 Operating Instructions Manual page 7

Basic small machine information
Operating instructions
FV 40.2
4.1.4 Rinse aid dosing
Liquid rinse aid is added into the final rinse system by an integrated
dosing unit. The exact dosing of the rinse aid is guaranteed by a time
switch
The instructions for operating and adjustment of the dosing units can be
found in the "Service Instructions".
4.2 Use for the purpose intended
The small machine must only be used for the purpose intended.
The dish washing machine is intended for washing dishes and cutlery.
The glass washing machine is intended for washing drinking glasses.
4.3 Improper use
Small machines and especially switch boxes and other electrical-
technical components must not be sprayed with a water hose or a high-
pressure hose.
Do not place any solvents or other easily flammable substances in the
washing-up area, as this increases the danger from explosions
The water in the washing-up area is not drinking water! Do not use the
water from the wash-up area for food preparation or drinking!
Do not place anything on the open door of the appliance, especially no
heavy loads, as the machine could tip over.
The door must be opened very carefully during the wash cycle to reduce
the risk of wash water splashing out of the appliance.
Steel pan scrubbers must not be used for pre-scouring or for cleaning
the items to be washed.
Do not wash any metal items which are not made of stainless steel in
the machine.
The entry of metal particles (especially iron, tinplate, copper) MUST be
prevented.
The appliance must not be used to transfer waste water from other
sources into the drain (warning: risk of corrosion and blockage).
Only use suitable products for cleaning the stainless steel surfaces.
These must not attack the material, form any deposits, nor cause any
discolorations.
- 7 -