Operation - Meiko FV 40.2 Operating Instructions Manual

Operation

Operating instructions
FV 40.2
Key / display
Table 1; Program key function / items to be washed
2.2 Preparation for washing and rinsing
The preparatory work described below must be carried out before each
operation.
Open the door
Insert the wash water sieves
Close the door
Danger of crushing!
Close the appliance with both hands!
Switch on the appliance by pressing one of the program pre-selection keys.
The time until the appliance is ready for operation depends on the temperature
of the water supply and the heating capacity of the boiler or tank installed.
In the case of cold water supply, the time taken is about 10 minutes.
2.3 Automatic dosing
The required detergent and rinse aid is moved from the containers into the tank
or boiler via electronically controlled dosing units. The dosing is carried out
automatically according to the requirements arising during the wash process.
Meaning
Short cycle for lightly soiled items
Normal cycle
Intensive cycle
Wash temperature
Final rinse temperature
Programme start
Tank drain
Self-cleaning cycle
Switch off appliance /
Cycle interruption
- 3 -