Transport, Delivery, Dimensions; Installation, Commissioning - Meiko FV 40.2 Operating Instructions Manual

Operating instructions
FV 40.2

Transport, Delivery, Dimensions

Transport, delivery, dimensions
4.1 Transport
Ø Observe transport instructions on the packing.
Ø The appliance must be moved with great care.
Ø Unpack the appliance.
Ø Check completeness of the delivery using the shipping documents.
Ø Examine the appliance for possible transit damage.
Ø Any damage must be reported immediately to the carrier, the insurance
company and the manufacturer.
Damaged appliances must not be commissioned.
4.2 Dimensions, technical data, installation instructions
See attached technical sheet

Installation, commissioning

5.1 Installation of small machines
The enclosed technical sheet indicates the connected loads and consumption
ratings of the appliance.
Small quantities of steam may escape from the door of the appliance. Furniture
and equipment situated near the door must be protected.
An engineer from your local MEIKO Service Centre can install the appliance at
the required position and connect the tables - upon request.
The following must be observed during the installation of the appliance:
Ø The complete unit must be levelled in both directions using a spirit level.
Ø Compensate for an uneven floor by adjusting the feet.
Ø Table joints must be sealed with detergent-resistant sealing compound (e.g.
silicone).
Ø Fit the pads supplied (with the equipment) to the adjustable feet to avoid
scratching the floor.
- 3 -