Rear side
(1) Pour out the developer material (refer to para.
10.3.3).
(2) Remove the leveler adjustment screw and the
springs (a coil spring and plate spring) at the
rear.
(3) Remove the adjuster plate (1 screw).
(Before removing it, memorize its original posi-
tion.)
Remove the rear plate (2 screws).
(4) Replace the guide roller.
Notes: 1. The guide roller is common for the front
and rear sides.
2. After reassembly, the doctor-to-sleeve
gap and the pole position should be
adjusted.
Mar. 1998 © TOSHIBA
Coil spring
10 - 7
Plate spring
Adjuster plate
Guide roller
1550/1560 DEVELOPER