8.3.2
Lower paper feed unit
(1) Pull out the cassette.
(2) Remove the upper paper feed unit.
(3) Remove the feed side cover and right side cov-
ers (lower, upper).
Note: Be careful not to lose the spring.
(4) Remove the separation roller.
The roller unit can be removed by pulling it to-
ward you.
Separation roller
(5) Disconnect two connectors and remove one
screw. Slide the whole unit toward the front,
then lower it and pull it out toward you.
Note that the feed roller can be removed with-
out taking out the whole unit. Just remove the
grip and pull out the roller from its shaft.
1550/1560 FEEDER
Clutch spring
Holder
8 - 8
Grip
Feed roller
Lower paper feed unit
Separation
roller
Mar. 1998 © TOSHIBA