13.4.2
Transport rollers (right)/(left), paper
stop switch, transport roller clutch and
door switch
(1) Remove the paper guide.
Transport roller clutch:
(1) Disconnect one connector.
(2) Loosen one setscrew.
Notes: 1. When reassembling the clutch, fit the
clutch's projection into the groove
shown securely and fasten the set-
screw.
2. The clutch harness should be passed
under the clutch as shown.
Door switch:
(1) Disconnect its connector, unhook its claws and
the switch can be taken out.
Transport rollers (right)/(left) and paper stop switch:
(1) Remove the transport roller clutch.
(2) Remove the transport paper guide (3 screws).
Mar. 1998 © TOSHIBA
Transport roller clutch
Connector
Harness
Transport roller
(right)
13 - 9
Setscrew
Connector
Groove
Door switch
Transport paper
guide
1550/1560 OPTIONAL