A-2)
Bypass misfeed
•
During sheet bypass copying
Manual-feed roller clutch (CLT4) goes ON.
Aligning switch (S5) comes ON.
If the aligning switch goes OFF when the aligning-roller starts rotating.
Bypass misfeed
The bypass misfeed symbol is displayed. (
Copying cannot be started.
A-3)
Insert key-copy counter.
•
If the key-copy counter (option) has been inserted in the machine and is withdrawn, "Insert
Key Counter" is displayed.
Copying can not be started.
•
If the key counter is withdrawn during copying, the machine will stop after the paper being
copied has exited.
Mar. 1998 © TOSHIBA
)
4 - 7
1550/1560 OPERATION