Mirror switch:
(1)
Remove the original glass.
(2)
Remove the optics cover (1 screw).
(3)
Move both carriages 1 and 2 to the exit side
and the mirror unit to the feed side.
(4)
Remove the switch by disengaging its claws.
Lens switch:
(1)
Remove the original glass.
(2)
Move the lens unit to the feed side.
(3)
Raise the upper unit.
(4)
Remove the duct fan (1 screw).
(5)
Remove the switch by disengaging its claws.
7.3.6
Exposure lamp and thermofuse
(1)
Remove the original glass.
(2)
Align carriage 1 with the cutout section of the
frame.
Mar. 1998 © TOSHIBA
Cutout section
View as seen from the exit side
7 - 9
Mirror switch
Lens unit
Lens switch
Cutout section
Carriage 1
1550/1560 OPTICAL