Transfer/Separation Terminal - Toshiba 1550 Service Manual

9.3.8

Transfer/separation terminal

(1) Remove the transfer/separation charger.
(2) Remove the rear cover and disconnect three
connectors.
(3) Remove one screw.
(4) Pull the transfer guide toward the front slightly
and lift it out.
Note: Be careful not lose the charger push-up
spring.
(5) Remove the two hooks and then take out the
transfer/separation terminal from the front side.
1550/1560 DRUM
Connector
Springs
9 - 8
Transfer guide
Transfer/
separation
terminal
Mar. 1998 © TOSHIBA