Notes: 1. Pay attention to the direction in which
the spring hanger on the front faces.
2. The charge wire should be placed se-
curely in the V-grooves on the front and
rear sides.
3. Don't allow the wire to kink.
4. Don't touch the wire with a bare hand.
5. The supporter should be fitted securely
in the hook and groove.
9.3.7
Damp heater unit (Option)
(1) Remove the transfer/separation charger.
(2) Remove the transport guide (one screw).
(3) Remove one screw securing the damp heater.
(4) Remove the inner cover (lower left) and left-
side cover (lower).
(5) Remove the rear cover.
(6) Remove a connector.
Mar. 1998 © TOSHIBA
Damp heater unit
9 - 7
Spring hanger
1550/1560 DRUM