Toshiba 1550 Service Manual page 212

(4) Fasten the paper guide !º using the fixing
screws 9 provided, as shown (4 places).
Note: When fastening the paper guide !º,
check to make sure that the separation
roller pressure springs !¡ are fitted in the
separation roller holders of the copier and
the MY-1004, respectively.
(5) Close the outer panel of the paper guide
0.
6. Reinstalling the rear covers
(1) Reinstall the rear covers of the copier and
the MY-1004.
(2) Return the cassettes to the original posi-
tions, respectively.
C. Operation Check of the MY-1004
(1) Plug the copier's power cord into the elec-
trical outlet and turn on the power switch.
(2) Set sheets of paper in the MY-1004's cas-
sette.
(3) Selecting the MY-1004's cassette, make a
few copies and check that the MY-1004
operates normally.
1550/1560 UNPACKING PROCEDURE 18 - 16 Mar. 1998 © TOSHIBA