Description Of Operations; Single Side Feeding - Toshiba MR-3011 Service Manual

5.

DESCRIPTION OF OPERATIONS

5.1 Single Side Feeding

(A4, registration ratio 100%)
(1) Setting original
The original is set on the tray and the empty sensor is turned ON.
The original set signal becomes ON.
(2) Start of pre-feeding operation Completion of pre-feeding operation
A feed signal is sent from the main unit, and the feed motor rotates the pickup roller and feed motor to start
feeding the original (pre-feeding operation).
(3) Start of feeding operation Original length sensor OFF
The feed motor starts to rotate in reverse and the read motor rotates forward to rotate the registration roller and
the read roller while the original is waiting in front of the registration roller and read roller starts to be transported.
The feed motor is stopped after the original length sensor is turned OFF.
October 2000 © TOSHIBA TEC 5-1 MR-3011/3012 DESCRIPTION OF OPERATION