Preparation; Components; Front/Left Side/Inner Side - Toshiba e-studio2309a User Manual

Hide thumbs Also See for e-studio2309a:
Table of Contents

Advertisement

1 PREPARATION

Components

 Front/Left side/Inner side
1. Reversing Automatic Document Feeder (RADF) (optional)
The stack of originals is scanned one sheet at a time. Both sides of the originals can be scanned. A
maximum of 50 sheets (80 g/m
that can be set may vary depending on the media type of the originals.)
 P.202 "Paper Misfeed"
2. Platen sheet
 P.218 "Regular Cleaning"
3. Original glass
Place the book-type originals and special paper such as overhead transparencies or tracing paper, as well
as plain paper.
4. Control panel
Make settings to use the various functions on this equipment.
 P.14 "Control panel"
5. Toner cartridge
For the recommended toner cartridges, refer to the Safety Information.
 P.211 "Replacing Toner Cartridge"
6. Front cover
Open this when you replace the toner cartridge.
 P.211 "Replacing Toner Cartridge"
7. Drawer
Place up to 250 sheets of plain paper (80 g/m
 P.24 "Loading paper in the drawer/Paper Feed Unit"
8. Paper Feed Unit (optional)
Use the Paper Feed Unit to add the second drawer. A maximum of 250 sheets (80 g/m
plain paper can be placed in one go.
10

Components

20
19
18
17
16
15
14
13
12
2
or 20 lb. Bond) can be placed in one go. (The maximum number of sheets
2
or 20 lb. Bond).
1
2
3
10
11
4
5
6
7
8
9
2
or 20 lb. Bond) of

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio2809a

Table of Contents