Changing the Paper Size of the Cassette
(1) Pull out the cassette and push down the bot-
tom plate. Then move the both side guides and
trail-edge guide to align them to the desired
size.
•
Before moving the side guides, push the
lever in the direction of A to unlock the side
guides.
•
Before moving the trail-edge guide, push
on its sides in the direction of B to unlock
the guide.
(2) Take out the paper size plate from the cassette
and reset it to show the desired size on the dis-
play.
(3) Place the paper on the cassette and check the
gaps between the paper and the side guides.
(4) Insert the cassette gently.
1550/1560 UNPACKING PROCEDURE
A
18 - 10
B
Mar. 1998 © TOSHIBA