10.4 Brush Motor Drive (M9)
The toner motor is provided to supply toner to the developer unit.
The toner motor is driven by 2SC2873Y (Logic PC board: Q19).
1
The (+) and (-) terminals of the motor winding is connected to +24V and pin 2 of Q19, respectively.
•
When pin 1 of Q20 becomes "L", pin 2 of Q19 also becomes "L".
•
A collector current flows from the +24V supply through the motor winding causing the motor to ro-
tate.
•
When pin 1 of Q20 becomes "H", pin 2 of Q19 also becomes "H", causing the current flowing through
the motor winding to flow to the +24V supply through D13.fThe current decreases with a time
constant determined by the inductance and resistance of the windingfcausing the motor to stop.
1550/1560 DEVELOPER
+5 VSW
2
Q20
RN2401
3
10 - 10
+24V
+24V
R1
(+)
D13
Toner motor
2
(–)
1
Q19
2SC2873Y
3
DG
Mar. 1998 © TOSHIBA