Separation Roller - Toshiba MR-3011 Service Manual

12.2 Separation Roller

(1) Open the jam access cover.
(2) Remove 2 screws and take off the separation unit.
(3) Remove 2 clips and slide 2 bushings to remove
the separation roller from the holder.
(4) Remove the E-ring, and pull out the shaft from the
serapation roller.
October 2000 © TOSHIBA TEC
Clip
12-2
Separation unit
Clip
Holder
Separation roller
MR-3011/3012 DISASSEMBLY
E-ring