General Safety Instructions; Service Work; General Information; Instructions For Adjustment - Otto Bock kimba neo Service Manual

Service Work

2.2 General Safety Instructions

CAUTION
Failure to observe installation instructions
Pinching, crushing due to installation errors
► Do not reach between force-actuated surfaces during installation work.
CAUTION
Use of unsuitable tools
Pinching, crushing or damaging the product
► When working, use only tools that are suitable for the conditions at the workplace and whose proper use
ensures safety and health protection.
CAUTION
Re-use of self-locking nuts
Unintended loosening of the screw connections
► Always replace self-locking nuts with new self-locking nuts after disassembly.
NOTICE
Tipping or falling of the product
Damage to the product
► When you work on the product, secure it so that it cannot tip over or fall over.
► Use a clamping device to secure the product for all work at a workbench.
3 Service Work

3.1 General Information

INFORMATION
Read the service manual before starting work. Familiarise yourself with the functions of the product prior to
inspection and use. In order to do so, you can request this service manual and other documentation from the
manufacturer (see the overview of national Ottobock branches on the inside of the back cover) or download from
our homepage www.ottobock.de or www.ottobock.com.
INFORMATION
Clean and disinfect the product before commencing service work.
Observe all care instructions and product-specific inspection instructions in the instructions for use.
INFORMATION
Many screw connections utilise screws and nuts equipped with thread lock. If you loosen screw connections, be
sure to replace the respective nut or screw with one equipped with a new thread lock. If new screws or nuts with
thread lock are not available, apply a medium-strength liquid thread locking compound (such as Loctite
Euro Lock A24.20) to the existing screws.

3.2 Instructions for Adjustment

WARNING
Failure to verify tipping resistance
Risk of the user falling or tipping over
► Changing the settings can lead to instability of the system as a whole. Verify tipping resistance after any
changes to the settings.
The sections that follow describe the replacement and retrofitting of standard and option parts on the product
shown on the cover.
8 | Ottobock
®
241 or
Kimba neo