Replacing The Grab Rail Cover (Option); Replacing The Frame Padding (Option) - Otto Bock kimba neo Service Manual

→ Pull the cover over the support starting with the side that does not have a lug (see Fig. 73, Pos. 1).
→ Pull the cover over the support with the help of the lug (see Fig. 73, Pos. 2).
→ Before fastening the hook-and-loop closure, push and fold down the lug (see Fig. 74).
5) Put the seat pad or backrest pad back into place.

3.6.1.4 Replacing the Grab Rail Cover (Option)

1) Push in the tripod spring and remove the grab rail (see Fig. 75, Pos. 1).
2) Pull the grab rail pad (see Fig. 71, Pos. 3) off the grab rail and replace it.
3) Slide the grab rail pad onto the grab rail (see Fig. 75).
4) Reattach the grab rail.

3.6.1.5 Replacing the Frame Padding (Option)

1) Open the hook-and-loop closure on the frame padding.
2) Remove and replace the frame padding.
3) Fit the frame padding around the push bar and close the hook-and-loop strap.
Kimba neo
71
73
75
Service Work
72
74
Ottobock | 25