Replacing The Seat Adapter (Tilt Activation On Standard Seat) - Otto Bock kimba neo Service Manual

3.5.3.2 Replacing the Seat Adapter (Tilt Activation on Standard Seat)

INFORMATION
When replacing the seat adapter, the Bowden cable also has to be replaced. It is included with the mounting
materials provided with the seat adapter (see Fig. 23).
1) Remove the Bowden cable on the Porter cylinder (see Page 12).
2) Unlock and remove the spring folding bolt on the porter cylinder (see Page 12).
3) Remove the Bowden cable on the seat adapter (see Fig. 20, Pos. 1).
4) Loosen the mounting screw on one side of the seat adapter (see Fig. 21, Pos. 1).
5) Remove the screw; insert a mounting aid (M8 screw with counter nut) in place of the screw that was removed
and install the counter nut (see Fig. 22, Pos. 1).
6) Loosen the mounting screw on the other side.
7) Remove the disassembly aid.
8) Remove and replace the seat adapter.
9) Install the seat adapter with the mounting materials provided (see Fig. 23). Tighten the seat adapter mounting
screws to a torque of 20 Nm:
10) Conduct a functional test. Pay particular attention to the functionality of the seat tilt feature and the seat tilt
mechanism in the tilted position.
Kimba neo
18
20
Service Work
19
21
Ottobock | 13