Push Bar; Replacing The Ratchet Joints With Folding Fixture; Replacing The Push Bar; Options/Accessories - Otto Bock kimba neo Service Manual

Service Work

3.5.6 Push Bar

3.5.6.1 Replacing the Ratchet Joints with Folding Fixture

1) Using a spiral bit (Ø 5 mm), bore out 4 rivets on each ratchet joint and tap them out with a pin punch (Ø 3 mm)
(see Fig. 47, Pos. 1/2).
2) Remove and replace the ratchet joints (see Fig. 48).
3) Rivet the ratchet joint with the folding fixture on the correct side (see Fig. 49).

3.5.6.2 Replacing the Push Bar

1) Using a spiral bit (Ø 5 mm), bore out 2 rivets on each ratchet joint and tap them out with a pin punch (Ø 3 mm)
(see Fig. 47, Pos. 1).
2) Remove and replace the push bar (see Fig. 50).
3) Rivet the push bar onto the ratchet joint.

3.5.7 Options/Accessories

3.5.7.1 Replacing the Storage Basket

NOTICE
Incorrect attachment
Damage to the product
► During the attachment, make sure that the product cannot grind against the wheels.
1) Open the snap fasteners and hook-and-loop straps of the storage basket (see Fig. 51, Pos. 1; see Fig. 52,
Pos. 1).
2) Remove and replace the storage basket.
3) Mount the storage basket, with the proper side, to the frame using the snap fasteners and hook-and-loop
straps (see Fig. 51, Pos. 1; see Fig. 52, Pos. 1).
20 | Ottobock
47
49
48
50
Kimba neo