Service Work
3.5.4 Suspension/Rear Wheel Linkage
3.5.4.1 Replacing the Suspension
1) Remove the plug-on rear wheel.
2) Put the frame on its side.
3) Loosen the suspension mounting screws (see Fig. 24, Pos. 1).
4) Remove and replace the suspension.
5) Install the suspension with the mounting materials provided (see Fig. 25). Tighten the mounting screws.
6) To adjust the spring force, see the following section.
3.5.4.2 Adjusting the suspension
The suspension can be adjusted continuously according to the user's weight and the conditions of the road/sur
face:
1) Twist the adjustment rings on both sides of the frame equally (see Fig. 26, item 1).
→ Clockwise: the suspension becomes tighter.
→ Counterclockwise: the suspension becomes softer.
2) Check that the adjustment rings are positioned the same on both sides. The 4 marks can be used for orienta
tion (see Fig. 26, item 2; see Fig. 27, item 1).
14 | Ottobock
22
24
23
25
Kimba neo