Replacing The Swivel Lock; Replacing The Casing - Otto Bock kimba neo Service Manual

3.5.2.4 Replacing the Swivel Lock

1) Remove the caster wheel and caster fork (see the preceding sections; see Fig. 11).
2) Slide the swivel lock off the front frame and replace it (see Fig. 12).
3) Slide the swivel lock onto the front frame.
4) Install the caster fork and caster wheel (see the preceding section).

3.5.2.5 Replacing the Casing

1) Remove the wheel (see Page 10) and let out the air if required.
2) Using a tyre lever, remove the casing from the rim (see Fig. 13).
3) Remove the tube.
4) Replace the casing (see Fig. 14, Pos. 1).
5) Fill the inner tube with a small amount of air before mounting in order to avoid damage and pinching.
6) Install the casing on the rim with a tyre lever.
7) Reinstall the wheel (see Page 10).
Kimba neo
9
11
13
Service Work
10
12
14
Ottobock | 11