3.6.2.2 Replacing the Knob
INFORMATION
The manufacturer offers the knob and cover cap in the following single components:
► Seat angle adjustment knob: see Fig. 81, item 1
► Seat angle adjustment cover cap: see Fig. 82, item 1
► Back angle adjustment knob: see Fig. 81, item 2
► Back angle adjustment cover cap: see Fig. 82, item 2
Replacing the Seat Angle Adjustment Knob and Cover Cap
1) Using a screwdriver, carefully pry up the cover cap, remove and replace it (see Fig. 83).
2) Remove and replace the circlip (see Fig. 84).
3) Pull the knob off the centring pivot and replace it.
4) Install the knob using the mounting materials provided (see Fig. 81, item 1).
5) Tap the cover cap (see Fig. 82, item 1) into the knob.
Kimba neo
79
81
Service Work
80
82
Ottobock | 27