3.6.3 Footplate/Knee Angle Assembly
3.6.3.1 Replacing the Foot Plate
1) Recommendation: Set the knee angle assembly horizontal.
2) Loosen the mounting screws in the slides (see Fig. 96). Ensure that the inserted flange nuts (see Fig. 97,
Pos. 2) do not fall out of the slides in the process.
3) Remove the footplate from the footplate adapter (see Fig. 96, Pos. 2) and replace it.
4) Slide the footplate onto the footplate adapter.
5) Tighten the mounting screws in the sliders to a torque of 5 Nm.
3.6.3.2 Replacing Small Parts on the Footplate
Replacing the Sliders
1) Remove the footplate.
2) Loosen the mounting screws on the sliders (see Fig. 98).
3) Remove and replace the sliders.
4) Tighten the mounting screws on the sliders to a torque of 5 Nm.
Kimba neo
92
94
96
Service Work
93
95
97
Ottobock | 31