5) Set the small plate onto the front frame tube (see Fig. 64, item 1).
6) Set the small plate onto the axle tube (see Fig. 64, item 2).
3.6 Multifunctional Seating Unit (Standard Seat)
3.6.1 Pads/Covers
INFORMATION
The manufacturer offers two versions of the pads and covers with identical mounting:
► Pads/covers (standard)
► Pads/covers (microfibre)
3.6.1.1 Replacing the Seat Pad
1) Lift the seat pad and remove it from the hook-and-loop fastener on the seat plate (see Fig. 65).
2) Replace the seat pad.
3) Fit the seat pad onto the hook-and-loop fastener.
4) Push the seat pad under the hip supports (see Fig. 66).
Kimba neo
61
63
65
Service Work
62
64
66
Ottobock | 23