Displaying And Maintaining Mld Configuration - HP A5500 SI Switch Series Configuration Manual

Displaying and maintaining MLD configuration

To do...
Display MLD group information
Display Layer 2 port information
about MLD groups
Display MLD configuration and
running information on the
specified interface or all MLD-
enabled interfaces
Display the information of the
MLD proxying groups
Display the information of the
MLD routing table
Display MLD SSM mappings
Display the IPv6 multicast group
information created based on
the configured MLD SSM
mappings
Remove the dynamic group
entries of a specified MLD group
or all MLD groups
Remove the dynamic Layer 2
port entries of a specified MLD
group or all MLD groups
Clear MLD SSM mappings
NOTE:
The reset mld group command cannot remove dynamic MLD group entries.
The reset mld group port-info command cannot remove the Layer 2 port entries of MLD groups.
CAUTION:
The reset mld group command might cause an interruption of receivers' reception of multicast data.
Use the command...
display mld group [ ipv6-group-address | interface
interface-type interface-number ] [ static | verbose ] [ | {
begin | exclude | include } regular-expression ]
display mld group port-info [ vlan vlan-id ] [ slot slot-
number ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
display mld interface [ interface-type interface-number ] [
verbose ] [ | { begin | exclude | include } regular-
expression ]
display mld proxying group [ group-address ] [ verbose ]
[ | { begin | exclude | include } regular-expression ]
display mld routing-table [ ipv6-source-address [ prefix-
length ] | ipv6-group-address [ prefix-length ] | flags { act
| suc } ] * [ | { begin | exclude | include } regular-
expression ]
display mld ssm-mapping ipv6-group-address [ | { begin
| exclude | include } regular-expression ]
display mld ssm-mapping group [ ipv6-group-address |
interface interface-type interface-number ] [ verbose ] [ | {
begin | exclude | include } regular-expression ]
reset mld group { all | interface interface-type interface-
number { all | ipv6-group-address [ prefix-length ] [ ipv6-
source-address [ prefix-length ] ] } }
reset mld group port-info { all | ipv6-group-address } [
vlan vlan-id ]
reset mld ssm-mapping group { all | interface interface-
type interface-number { all | ipv6-group-address [ prefix-
length ] [ ipv6-source-address [ prefix-length ] ] } }
318
Remarks
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
user view
Available in
user view
Available in
user view