Clearing Ipv6 Mbgp Information; Ipv6 Mbgp Configuration Example - HP A5500 SI Switch Series Configuration Manual

To do...
Reset specified IPv6 MBGP
connections

Clearing IPv6 MBGP information

To do...
Clear dampened IPv6 MBGP
routing information and release
suppressed routes
Clear IPv6 MBGP route flap
statistics

IPv6 MBGP configuration example

Network requirements
IPv6 PIM-SM 1 is in AS 100, and IPv6 PIM-SM 2 is in AS 200. OSPFv3 is the IGP in the two ASs,
•
and IPv6 MBGP runs between the two ASs to exchange IPv6 multicast route information.
The IPv6 multicast source belongs to IPv6 PIM-SM 1, and the receiver belongs to IPv6 PIM-SM 2.
•
Configure VLAN-interface 101 of Switch A and Switch B as the C-BSR and C-RP of the respective
•
IPv6 PIM-SM domains.
Figure 104 Network diagram for IPv6 MBGP configuration
AS 100
Switch A
IPv6 PIM-SM 1
IPv6 MBGP peers
Device
Source
Switch A
Use the command...
reset bgp ipv6 multicast { as-
number | ipv6-address | all |
group ipv6-group-name | external
| internal }
Use the command...
reset bgp ipv6 multicast
dampening [ ipv6-address prefix-
length ]
reset bgp ipv6 multicast flap-info [
ipv6-address/prefix-length |
regexp as-path-regexp | as-path-
acl as-path-acl-number ]
AS 200
Vlan-int101
Vlan-int100
Source
Interface IP address
- 1002::100/64
Vlan-int100 1002::1/64
Vlan-int101 1001::1/64
Switch B
Vlan-int101
Vlan-int104
Vlan-int104
Switch D
IPv6 PIM-SM 2
Device
Switch C
421
Remarks
Available in user view
Remarks
Available in user view
Available in user view
Receiver
Switch C
Interface IP address
Vlan-int200 3002::1/64
Vlan-int102 2001::2/64
Vlan-int104 3001::1/64