Table of Contents
Advertisement
Switch B
Configuration Procedure
Configure IP addresses and unicast routing
1.
Configure the IP address and subnet mask for each interface according to
Configure OSPF for interoperation among the switches. Ensure the network-layer interoperation within
and between the PIM-SM domains and ensure dynamic update of routing information among the
switches by leveraging unicast routing (details not shown).
Enable IP multicast routing, PIM-SM and IGMP, and configure a PIM domain border
2.
# On Switch A, enable IP multicast routing, enable PIM-SM on each interface, and enable IGMP on the
host-side interface, VLAN-interface 100.
<SwitchA> system-view
[SwitchA] multicast routing-enable
[SwitchA] interface vlan-interface 100
[SwitchA-Vlan-interface100] igmp enable
[SwitchA-Vlan-interface100] pim sm
[SwitchA-Vlan-interface100] quit
[SwitchA] interface vlan-interface 101
[SwitchA-Vlan-interface101] pim sm
[SwitchA-Vlan-interface101] quit
[SwitchA] interface vlan-interface 102
[SwitchA-Vlan-interface102] pim sm
[SwitchA-Vlan-interface102] quit
[SwitchA] interface loopback 0
[SwitchA-LoopBack0] pim sm
[SwitchA-LoopBack0] quit
The configuration on Switch B, Switch C, and Switch D is similar to the configuration on Switch A
(details not shown).
# Configure a PIM domain border on Switch C.
[SwitchC] interface vlan-interface 101
[SwitchC-Vlan-interface101] pim bsr-boundary
[SwitchC-Vlan-interface101] quit
[SwitchC] interface vlan-interface 103
[SwitchC-Vlan-interface103] pim bsr-boundary
[SwitchC-Vlan-interface103] quit
[SwitchC] interface vlan-interface 104
[SwitchC-Vlan-interface104] pim bsr-boundary
[SwitchC-Vlan-interface104] quit
The configuration on Switch A, Switch B, and Switch D is similar to the configuration on Switch C
(details not shown).
Configure C-BSRs and C-RPs
3.
Loop0
1.1.1.1/32
Vlan-int200
10.110.3.1/24
Vlan-int102
10.110.2.2/24
Vlan-int103
192.168.2.1/24
Switch D
Vlan-int400
Vlan-int500
Vlan-int104
Loop0
216
10.110.6.1/24
10.110.7.1/24
10.110.5.2/24
3.3.3.3/32
Figure 61
(details not shown).
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
