Protocols And Standards; Mld Snooping Configuration Task List - HP A5500 SI Switch Series Configuration Manual

MLD message
Done

Protocols and standards

RFC 4541, Considerations for Internet Group Management Protocol (IGMP) and Multicast Listener
Discovery (MLD) Snooping Switches

MLD snooping configuration task list

Complete these tasks to configure MLD snooping:
Task
Configuring basic functions of
MLD snooping
Configuring MLD snooping port
functions
Configuring MLD snooping
querier
Configuring MLD snooping
proxying
Configuring an MLD snooping
policy
Actions
In response to a done message for an IPv6 multicast group, the proxy sends a multicast-
address-specific query for the group out the receiving port. After making sure that no
member port is contained in the forwarding entry for the IPv6 multicast group, the proxy
sends a done message for the group out all router ports.
Enabling MLD snooping
Configuring the version of MLD snooping
Configuring an IPv6 static multicast MAC address entry in
system view
Configuring aging timers for dynamic ports
Configuring static ports
Configuring simulated joining
Configuring fast-leave processing
Disabling a port from becoming a dynamic router port
Enabling MLD snooping querier
Configuring MLD queries and responses
Configuring source IPv6 addresses of MLD queries
Enabling MLD snooping proxying
Configuring a source IPv6 address for the MLD messages
sent by the proxy
Configuring an IPv6 multicast group filter
Configuring IPv6 multicast source port filtering
Configuring the function of dropping unknown
multicast data
Configuring MLD report suppression
Configuring the maximum number of multicast groups that
a port can join
Configuring IPv6 multicast group replacement
Configuring 802.1p precedence for MLD messages
Configuring an IPv6 multicast user control policy
245
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
IPv6
Optional
Optional
Optional
Optional
Optional
Optional