HP A5500 SI Switch Series Configuration Manual page 217

[SwitchE-bgp] peer 192.168.3.1 as-number 200
[SwitchE-bgp] import-route ospf 1
[SwitchE-bgp] quit
# Redistribute BGP routes into OSPF on Switch B.
[SwitchB] ospf 1
[SwitchB-ospf-1] import-route bgp
[SwitchB-ospf-1] quit
The configuration on Switch C and Switch E is similar to the configuration on Switch B.
Configure MSDP peers
5.
# Configure an MSDP peer on Switch B.
[SwitchB] msdp
[SwitchB-msdp] peer 192.168.1.2 connect-interface vlan-interface 101
[SwitchB-msdp] quit
# Configure an MSDP peer on Switch C.
[SwitchC] msdp
[SwitchC-msdp] peer 192.168.1.1 connect-interface vlan-interface 101
[SwitchC-msdp] peer 192.168.3.2 connect-interface vlan-interface 102
[SwitchC-msdp] quit
# Configure MSDP peers on Switch E.
[SwitchE] msdp
[SwitchE-msdp] peer 192.168.3.1 connect-interface vlan-interface 102
[SwitchE-msdp] quit
Verify the configuration
6.
Use the display bgp peer command to view the BGP peering relationships between the switches. For
example:
# View the information about BGP peering relationships on Switch B.
[SwitchB] display bgp peer
BGP local router ID : 1.1.1.1
Local AS number : 100
Total number of peers : 1
Peer V
192.168.1.2 4
# View the information about BGP peering relationships on Switch C.
[SwitchC] display bgp peer
BGP local router ID : 2.2.2.2
Local AS number : 200
Total number of peers : 2
Peer V
192.168.1.1 4
Peers in established state : 1
AS MsgRcvd MsgSent
200 24 21
Peers in established state : 2
AS MsgRcvd MsgSent
100 18 16
205
OutQ PrefRcv Up/Down
0 6 00:13:09 Established
OutQ PrefRcv Up/Down
0 1 00:12:04 Established
State
State