Configuring Join/Prune Message Sizes; Displaying And Maintaining Ipv6 Pim - HP A5500 SI Switch Series Configuration Manual

NOTE:
Use the default settings if no special networking requirements are raised.

Configuring join/prune message sizes

A larger join/prune message size will result in loss of a larger amount of information when a message is
lost. With a reduced join/message size, the loss of a single message has a relatively minor impact.
The maximum number of (S, G) entries in a join/prune message can reduce the number of (S, G) entries
sent per unit of time.
Follow these steps to configure join/prune message sizes:
To do...
Enter system view
Enter IPv6 PIM view
Configure the maximum size of a
join/prune message
Configure the maximum number
of (S, G) entries in a join/prune
message

Displaying and maintaining IPv6 PIM

To do...
Display the BSR information in the
IPv6 PIM-SM domain and locally
configured C-RP information in
effect
Display the information of IPv6
unicast routes used by IPv6 PIM
Display the number of IPv6 PIM
control messages
Display the DF information of IPv6
BIDIR-PIM
Display the information about
unacknowledged graft messages
Display the IPv6 PIM information
on an interface or all interfaces
Use the command...
system-view
pim ipv6
jp-pkt-size packet-size
jp-queue-size queue-size
Use the command...
display pim ipv6 bsr-info [ | { begin | exclude |
include } regular-expression ]
display pim ipv6 claimed-route [ ipv6-source-address
] [ | { begin | exclude | include } regular-expression
]
display pim ipv6 control-message counters [
message-type { probe | register | register-stop } | [
interface interface-type interface-number | message-
type { assert | bsr | crp | graft | graft-ack | hello |
join-prune | state-refresh } ] * ] [ | { begin |
exclude | include } regular-expression ]
display pim ipv6 df-info [ rp-address ] [ | { begin |
exclude | include } regular-expression ]
display pim ipv6 grafts [ | { begin | exclude |
include } regular-expression ]
display pim ipv6 interface [ interface-type interface-
number ] [ verbose ] [ | { begin | exclude | include
} regular-expression ]
374
Remarks
—
—
Optional
8,100 bytes by default
Optional
1,020 by default
Remarks
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view