Displaying And Maintaining Mld Snooping - HP A5500 SI Switch Series Configuration Manual

To do...
Enable the created user profile
NOTE:
For more information about the user-profile and user-profile enable commands, see the
Command Reference.
An IPv6 multicast user control policy is functionally similar to an IPv6 multicast group filter. A
difference lies in that a control policy can control both multicast joining and leaving of users based
on authentication and authorization, but a multicast group filter is configured on a port to control
only multicast joining but not leaving of users without authentication or authorization.

Displaying and maintaining MLD snooping

To do...
Display MLD snooping group
information
Display the statistics information of MLD
messages learned by MLD snooping
Display IPv6 static multicast MAC
address entries
Remove dynamic group entries of a
specified MLD snooping group or all
MLD snooping groups
Clear the statistics information of all
kinds of MLD messages learned by MLD
snooping
NOTE:
The reset mld-snooping group command works on only an MLD snooping–enabled VLAN, but not
on a VLAN with MLD enabled on its VLAN interface.
The reset mld-snooping group command cannot remove the static group entries of MLD snooping
groups.
For more information about the display mac-address multicast command, see the
Command Reference.
Use the command...
user-profile profile-name enable
Use the command...
display mld-snooping group [ vlan vlan-
id ] [ slot slot-number ] [ verbose ] [ | {
begin | exclude | include } regular-
expression ]
display mld-snooping statistics [ | { begin
| exclude | include } regular-expression ]
display mac-address [ mac-address [
vlan vlan-id ] | [ multicast ] [ vlan vlan-id
] [ count ] ] [ | { begin | exclude |
include } regular-expression ]
reset mld-snooping group { ipv6-group-
address | all } [ vlan vlan-id ]
reset mld-snooping statistics
261
Remarks
Required
Not enabled by default.
Security
Remarks
Available in any
view
Available in any
view
Available in user
view
Available in user
view
Available in user
view
IP Multicast